As workplace safety takes precedence in today’s corporate world, ensuring the well-being of workers is a top priority. However, one area that often goes overlooked is footwear. A crucial element of personal protective equipment (PPE) is safety footwear, which provides essential protection against potential foot injuries in hazardous work environments. Adherence to recognized standards is paramount to guarantee the quality and performance of safety footwear. Among these, the ASTM-F2413-18 standard stands out as a benchmark for excellence.  

With stringent regulations in place, manufacturers must comply with industry standards to ensure the quality and performance of their safety footwear. In this blog, we will delve into the world of ASTM-F2413-18, exploring its significance, the requirements it entails, and the benefits of partnering with a trusted quality control inspection provider for compliance.

ASTM-F2413-18 – An Overview

ASTM-F2413-18 is a standard set by the American Society for Testing and Materials (ASTM) that establishes the minimum performance requirements for safety footwear used in various industrial and occupational settings. The standard encompasses an array of safety features, including impact resistance, compression resistance, metatarsal protection, puncture resistance, electric hazard protection, slip resistance, and sole durability. Meticulous testing is conducted on these features to ensure that safety footwear adequately protects the feet of workers who may be exposed to potential hazards in the workplace.

ASTM-F2413-18 is an updated version of the previous standard ASTM-F2413-11, and it sets higher requirements for footwear quality control. It is widely recognized and accepted by regulatory agencies, employers, and safety professionals as a benchmark for evaluating the quality and safety of safety footwear. Manufacturers, distributors, and end-users of safety footwear are encouraged to comply with ASTM-F2413-18 to ensure that their products or the products they use meet the stringent safety requirements for workplace footwear.

What Are Safety Footwear Regulations?

Regulators enforce safety footwear regulations to ensure that workers in the workplace receive adequate protection from potential foot injuries. These regulations provide guidelines for manufacturers when designing and producing safety footwear, and regulatory agencies or industry organizations typically establish them. Compliance with safety footwear regulations is not only a legal requirement in many jurisdictions but also essential for safeguarding the well-being of workers.

What does Safety Toe ASTM F2413-18 Mean?

One of the critical components of the ASTM-F2413-18 standard is the safety toe requirement. Manufacturers specifically design safety toe caps to safeguard the toes against impact and compression injuries. The ASTM-F2413 standard classifies safety toe caps into three main types:

  • Steel Toe (ST):Made of steel, these caps provide excellent protection against impact and compression hazards. They are known for their durability and ability to withstand heavy loads.
  • Composite Toe (CT): Made of non-metallic materials such as plastic, carbon fibre, or Kevlar, composite toe caps are lightweight and do not conduct electricity, making them ideal for electrically sensitive environments. They provide similar protection as steel toe caps but are more comfortable due to their lighter weight.
  • Aluminum Toe (AT): Made of aluminum, these caps are lightweight and offer protection against impact and compression hazards. They are ideal for workers who require lightweight footwear for extended periods of wear.

The safety toe caps must meet specific performance requirements set by the ASTM-F2413 standard, including the ability to withstand a certain amount of impact energy and compressive load without allowing the toe to be crushed or pierced.

What Are the Requirements for ASTM-F2413-18?

The ASTM safety standards outline several key requirements for safety footwear to comply with. These requirements include:

  • Impact Resistance: Safety footwear must be capable of protecting the toes from the impact of falling objects or other impacts. The standard specifies how much force the footwear must withstand without allowing the toes to be injured, measured in foot pounds or joules.
  • Compression Resistance: Safety footwear must be able to withstand compressive forces, such as those that may occur from heavy objects rolling over the feet. The standard specifies the amount of force that the footwear must withstand without allowing the toes to be compressed, measured in pounds or newtons.
  • Metatarsal Protection: If the metatarsal bones (the bones in the middle of the foot) are at risk of injury in the workplace, safety footwear must provide metatarsal protection. The standard specifies the amount of force that the footwear must withstand without allowing the metatarsal bones to be injured, measured in foot pounds or joules.
  • Puncture Resistance: Safety footwear’s insoles must protect against puncture hazards, such as nails or other sharp objects. The ASTM safety shoes standard specifies the amount of force that the footwear must withstand without allowing the puncture hazard to penetrate the insole, measured in pounds or newtons.
  • Sole Durability: The sole of safety footwear must be durable and capable of withstanding the rigours of the work environment. The sole must resist wear and tear, and maintain its integrity over time to ensure long-lasting performance and protection for the wearer.
  • Electric Hazard Protection: Safety footwear must effectively protect against electrical hazards in the workplace if workers are exposed to such risks. The standard mandates that footwear must meet specific requirements for electrical resistance to mitigate the risk of electric shock in the workplace. It also outlines precise testing methods and requirements for slip resistance, including comprehensive testing on various surfaces and under diverse conditions.
  • Marking and Labeling: Safety footwear must be labeled to indicate compliance with the ASTM-F2413-18 standard. The markings typically include information such as the manufacturer’s name or logo, model number, size, and an indication of the specific safety features provided, such as “SD” for static dissipative or “EH” for electrical hazard protection.
  • Fit and Comfort: Safety footwear should provide a proper fit and be comfortable to wear for extended periods. While the ASTM-F2413-18 standard does not specifically outline fit and comfort requirements, manufacturers are encouraged to design safety footwear that is ergonomic, lightweight, and provides adequate support and cushioning for the feet.


It is important to note that compliance with the ASTM-F2413-18 standard is not a one-time event. Manufacturers are required to conduct ongoing quality control testing and inspection to ensure that their safety footwear consistently meets the standard’s requirements. This includes conducting regular testing of footwear samples, maintaining comprehensive records of testing results, and implementing corrective actions in case of any identified non-compliance.

Compliance with ASTM-F2413-18 requires rigorous testing and inspection of safety footwear. Partnering with a trusted quality control provider can be invaluable in ensuring compliance and product superiority. Global Inspection Managing (GIM) has extensive experience in conducting thorough inspections and tests on safety footwear to verify compliance with ASTM-F2413-18 and other relevant standards. Our team of expert inspectors uses state-of-the-art equipment and techniques to assess the performance and durability of safety footwear.

GIM follows strict protocols and industry best practices to ensure accurate and reliable results. Our comprehensive quality control services include product testing, inspection, and documentation providing manufacturers with detailed reports on the performance of their safety footwear. This allows manufacturers to promptly identify and rectify any non-compliance issues, ensuring that their products meet the stringent requirements of the ASTM-F2413-18 standard.

By partnering with GIM for quality control, manufacturers can gain peace of mind knowing that their safety footwear is of the highest quality and compliant with the ASTM-F2413-18 standard. GIM’s expertise in shoe quality control and commitment to excellence make us a reliable and trusted partner for ensuring compliance with industry standards.